0

Your Cart is Empty

Speed up the process by sending in your own molD

If you ALREADY have A MOLD of your upper teeth, send IT TO us and speed things up.

  • Text photos of your upper mold to 951-634-6708 and we'll let you know if it meets our requirements; not all molds are created equally. 
  • Shop for your custom mouthguard and in while filling out the product order form, choose Send Us Your Mold.
  • Fill out the order form below, and enclose it with your mold. If you don’t have a printer, just write down all the information from the order form on a piece of paper, and send that with your mold.
  • Package your mold very carefully because it is very fragile. If it gets damaged during shipping, we will not be able to use it. DO NOT let it rattle around in the package.
  • Ship your mold to: Mouthpiece Guy | 1109 W San Bernardino Rd #130 |Covina, CA 91722

IN the PHOTOS OF thE mold BELOW, you can see we have all the teeth and all the gums. TAKE 4 PHOT0S WITH FLASH ON FROM THESE SAME ANGLES, AND WE'LL LET YOU KNOW IF IT'S GOOD ENOUGH TO BE USED.

GETTING A MOLD MADE FROM A DENTIst? 

Make sure they can provide what we require before getting your mold made. Show them the photos and info on this page, and if they can't acheive this, go somewhere else!

  • Impression must have full vestibule capture w/ borders (see photo below) and frenum attachments; tall impression with all the teeth and all the gums.
  • Model must be poured in yellow lab stone (see 4 photos above), NOT soft white plaster or hard die stone, with minimal bubbles.
  • Model needs to be untrimmed with a full base that we can trim in our lab.

Send upper model only. Do not send a lower model or bite registration.

Impression Requirements

GETTING A MOLD MADE FROM A DENTIst? 

Make sure they can provide what we require before getting your mold made. Show them the photos and info on this page, and if they can't acheive this, go somewhere else!

  • Impression must have full vestibule capture w/ borders (see photo below) and frenum attachments; tall impression with all the teeth and all the gums.
  • Model must be poured in yellow lab stone (see 4 photos above), NOT soft white plaster or hard die stone, with minimal bubbles.
  • Model needs to be untrimmed with a full base that we can trim in our lab.

Send upper model only. Do not send a lower model or bite registration.

Impression Requirements

We offer 3 OTHER WAYS TO GET fitted for A CUSTOM MOUTHGUARD:

If you're near Covina CA, just contact us to schedule an appointment and our team will do your fitting for you.

We'll ship you everything you need to take a perfect mold of your teeth at home in less than 10 minutes.

For VIP's and group orders, we can travel to your location and get you and your entire team fitted on site.

IF YOU ALREADY HAVE A MOLD OF YOUR upper TEETH, SEND IT TO US AND SPEED THINGS UP.

  • Text photos of your upper mold to 951-634-6708 and we'll let you know if it meets our requirements; not all molds are created equally.
  • Shop for your custom mouthguard and in while filling out the product order form, choose Send Us Your Mold.
  • Fill out the order form below, and enclose it with your mold. If you don’t have a printer, just write down all the information from the order form on a piece of paper, and send that with your mold.
  • Package your mold very carefully because it is very fragile. If it gets damaged during shipping, we will not be able to use it. DO NOT let it rattle around in the package.
  • Ship your mold to: Mouthpiece Guy | 1109 W San Bernardino Rd #130 |Covina, CA 91722

IN the PHOTOS OF thE mold BELOW, you can see we have all the teeth and all the gums. TAKE 4 PHOT0S WITH FLASH ON FROM THESE SAME ANGLES, AND WE'LL LET YOU KNOW IF IT'S GOOD ENOUGH TO BE USED.

GETTING A MOLD MADE FROM A DENTIst? 

Make sure they can provide what we require before getting your mold made. Show them the photos and info on this page, and if they can't acheive this, go somewhere else!

  • Impression must have full vestibule capture w/ borders (see photo below) and frenum attachments; tall impression with all the teeth and all the gums.
  • Model must be poured in yellow lab stone (see 4 photos above), NOT soft white plaster or hard die stone, with minimal bubbles.
  • Model needs to be untrimmed with a full base that we can trim in our lab.

Send upper model only. Do not send a lower model or bite registration.

Impression Requirements

We offer 3 OTHER WAYS TO GET fitted for A CUSTOM MOUTHGUARD:

If you're near Covina CA, just contact us to schedule an appointment and our team will do your fitting for you.

We'll ship you everything you need to take a perfect mold of your teeth at home in less than 10 minutes.

For VIP's and group orders, we can travel to your location and get you and your entire team fitted on site.

News & Updates

Protection Level Recommendations

ULTRA LIGHT
Protection Level = B+

RECOMMENDED FOR: Baseball, basketball, bmx, cheerleading, football, hockey, jiu jitsu, judo, lacrosse, motocross, rodeo, roller derby, rugby, soccer, softball, volleyball, weighlifting, wrestling.
APPROXIMATE THICKNESS: 3mm

LIGHT
Protection Level = A-

RECOMMENDED FOR: Amateur boxing, MMA, muay thai, kickboxing, jiu jitsu, wrestling.
APPROXIMATE THICKNESS: 3.5mm

MEDIUM
Protection Level = A

RECOMMENDED FOR: Pro & amateur boxing, MMA, muay thai, kickboxing.
APPROXIMATE THICKNESS: 4mm

HEAVY
Protection Level = A+

RECOMMENDED FOR: Heavyweight pro boxing, MMA, muay thai, kickboxing.
APPROXIMATE THICKNESS: 4.5mm